BAE Systems demonstrates APKWS-guided rockets destroy all targets including fast-moving drones

BAE Systems reports completion of additional ground-to-air test firings to prove the effectiveness of 70mm rockets guided by Advanced Precision Kill Weapon System (APKWS) guidance kits against Class-2 unmanned aerial systems (UAS) that weigh roughly 25-50 pounds and can travel at speeds exceeding 100 miles per hour.

During the demonstration in Southern Arizona, five APKWS-guided counter-UAS rockets were fired from a containerized weapon system and destroyed all targets, including fast-moving drones. The test results further demonstrate APKWS guidance kits’ ability to enable low-cost, precision strikes against airborne threats, says the BAE press release.

“Militarized drones are becoming more prevalent in conflicts around the world, and we’re giving our customers an efficient way to counter them without wasting expensive missiles,” said Greg Procopio, director of Precision Guidance and Sensing Solutions at BAE Systems. “Our tests demonstrate that APKWS guidance kits have the flexibility to engage a variety of targets to meet the evolving mission needs of the warfighter.”

The 70mm rockets is designed to destroy Class-2 aerial drones by combining standard motors and warheads with APKWS guidance kits and proven proximity/point-detonation fuses. The resulting precision munition is a low-cost, supersonic, lock-on-after-launch strike weapon with a large 10-pound warhead that can destroy large drones in a matter of seconds with or without direct contact.

Combat-proven APKWS-guided rockets are effective against a variety of soft and armored stationary and moving targets. They can be fired by many different platforms, including jets, helicopters, trucks, boats, and weapon stations, and stowed APKWS guidance kits protect seeker optics from adjacent rocket fire, unlike nose-mounted seeker optics. APKWS guidance are available to all US armed forces, as well as US allies via Foreign Military Sales for 70mm laser-guided rockets.

APKWS guidance kits are produced at BAE Systems manufacturing facilities in Hudson, New Hampshire and Austin, Texas.

For more information visit:

www.baesystems.com

Share this:
Counter Drone System - D-Fend Solutions